Switzernet VoIP téléphonie IP Suisse Weltweit praktisch gratis telefonieren: kostenlos nach Schweiz, Deutschland, Frankreich, Grossbritannien, USA

 Startseite 
 Switzernet? 
 Tarife 
 Geräte 
 Support 
 Registration 


How to configure Zoiper on Mac

Created by Sonja Guicheux on 2021-02-16

 

Table of Contents

Introduction

Descriptionsx

Zoiper

Download

Configuration

References

 

Introduction 

This document will explain how to configure application Zoiper on your Mac

 

Descriptions

Zoiper is softphone application for VoIP calls. To use any softphone application, you need wi-fi or internet cable.

Zoiper

Follow the steps to configure your application well

Download

  1. Download application https://www.zoiper.com/en/voip-softphone/download/current.

  2. Install application.

  3. Open application.

Configuration

 

Click on Continue as a Free user

Here fill your datas.

Username/ login is your 4z number. 41……...

Password is your service password form porta billing

Click Login

Fill sip. Ofc you will put your sip number.

And click Next

  Here, click on that small square Optional. Then you will have possibility to fill next areas.

  Authentication username is your 4z number.

  Outbound proxy is same sip what you put in previous step .

It looks like this.

Now click Next

Here click on UDP and wait to finish loading.

When is finish loading all, Click Next.

Here you can see that your account is registered well.

Good luck for you

References

https://www.zoiper.com/en/voip-softphone/download/current